Notu Cars

2025 GMC Yukon problems and complaints

Owners have filed 59 complaints with NHTSA about the 2025 GMC Yukon. The most-reported problem area is engine (39 complaints), followed by electrical system (10) and driver assistance (8). The complaints report 1 injury. NHTSA lists 2 safety recalls for this model year.

Complaints
59
Recalls
2
Crashes
0
Fires
0
Injuries
1
Deaths
0

What owners report about the 2025 GMC Yukon

Complaints by problem area. A complaint can name more than one area, so the bars add up to more than 59.

Engine
39
Electrical system
10
Driver assistance
8
Powertrain
7
Brakes
3
Fuel and propulsion
3
Steering
2
Air bags
1
Speed control
1
Visibility and wipers
1

Most-reported specific components

Forward collision avoidance › Adaptive cruise control
4
Forward collision avoidance › Automatic emergency braking
3
Forward collision avoidance › Warnings
2
Back over prevention › Sensing system › Camera
1
Back over prevention › Display function
1
Lane departure › Blind spot detection
1
Lane departure › Assist
1
Lane departure › Warning
1

How the 2025 compares with other GMC Yukon years

The 2025 model year has the 27th-most complaints of 38 GMC Yukon model years on record. Counts are not adjusted for sales, and newer model years have had less time to collect complaints.

2005 852006 272007 4282008 1882009 942010 1052011 1582012 632013 1172014 562015 5302016 2712017 1962018 712019 582020 382021 3512022 1872023 2502024 1072025 592026 52

All GMC Yukon model years

Mileage when the problem was reported

Based on the 8 complaints that gave a mileage. Half of them were filed at 5,993 miles or less.

Under 25K miles
5
25K–50K miles
3
50K–75K miles
0
75K–100K miles
0
100K–125K miles
0
125K–150K miles
0
150K+ miles
0

When the complaints were filed

Complaints NHTSA received each calendar year about the 2025 GMC Yukon. First on Feb 2, 2025, most recent on Nov 9, 2026.

View as table
Year receivedComplaints
202525
202634

2025 GMC Yukon recalls

2 recall campaigns on record, newest first. A recall may cover only some vehicles of this model year. Check your VIN at NHTSA to see whether a recall is open on a specific car.

Wheels › Hub

NHTSA campaign 26V304000 · Filed May 14, 2026 · 2,457 vehicles potentially affected

Defect
General Motors, LLC is recalling certain 2025–2026 Cadillac Escalade, Escalade ESV, Chevrolet Suburban 1500, Tahoe, GMC Yukon, and Yukon XL vehicles with 24-inch wheels. Incorrect bolts may have been installed on the left and right front wheel hubs, which can result in the bolts loosening or deforming over time.
Risk
A bolt that loosens or breaks during vehicle operation can result in loss of vehicle control, increasing the risk of a crash.
Remedy
Dealers will replace the front left and right wheel hub bolts, free of charge. Owner notification letters were mailed June 18, 2026. Owners may contact GMC customer service at 1-800-462-8782, Chevrolet customer service at 1-800-222-1020 or Cadillac customer service at 1-800-333-4223. GM's number for this recall is N262554630. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on May 14, 2026.

Equipment adaptive/mobility › Wheelchair restraints/securement › Latch/anchor

NHTSA campaign 25V876000 · Filed Dec 17, 2025 · 86 vehicles potentially affected

Defect
Rollx Vans (Rollx) is recalling certain GMC Yukon, Sierra, Chevrolet Express 2500, Ford Transit, E-250, Toyota Sienna, Sienna Hybrid, Honda Odyssey, Chrysler Town and Country, Voyager, Pacifica, Dodge Grand Caravan, and Ram Promaster vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. Please refer to Rollx's recall report for specific model year information. The retractors may not lock, preventing the wheelchair from being properly secured.
Risk
An unsecured wheelchair can move during transit, increasing the risk of injury.
Remedy
Rollx will work with Q'Straint to inspect and replace the retractors as necessary, free of charge. Owner notification letters were mailed February 5, 2026. Owners may contact Rollx's customer service at 1-800-956-6668.

What 2025 GMC Yukon owners wrote

The 40 most recent of 59 complaints, exactly as filed with NHTSA. These are owners' own accounts and have not been verified.

Nov 9, 2026 · AL

Electrical system · Engine

My 2025 GMC Yukon AT4 Ultimate (VIN [XXX]) has started its engine by itself at least three times when nobody commanded a start. Two of those unattended starts happened while the vehicle was parked in a closed residential garage, which creates a serious carbon monoxide risk to people in the home. I now park it outdoors until the cause is found. The most recent incident was XXX at 7:08 a.m. Central time. Occupants were asleep and nobody started it; both key fobs were accounted for. The myGMC app history shows a successful remote Start at 07:08 AM that none of us sent, followed by two failed Stop attempts at 07:21 AM ("Yukon not responding. Use key to start manually and restore connection."), which I sent after learning it was running. I reported this to OnStar (case XXX) on XXX. OnStar said it could see multiple start attempts persisted through the app but could not see which device or account sent them. The case was escalated to GM's senior technicians, who were unable to trace the source of the start commands. A GM call on XXX was dismissive and did not resolve the issue. The vehicle can still start remotely with no explanation of where the commands come from. Dealer: Royal Buick GMC, Vestavia Hills, AL. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID 11776867

Oct 26, 2026 · 39,481 miles · MD

Service brakes, hydraulic

The contact owns a 2025 GMC Yukon. The contact stated that while driving at 55 MPH, the brake assist failure and service esc warning lights were illuminated, the brake pedal became very stiff. The vehicle failed to stop as needed and coasted off the roadway and shifted into park(P). The manufacturer was notified of the failure. The vehicle was towed to the dealer but was not yet diagnosed. The failure mileage was 39,481.

NHTSA ID 11773700

Oct 14, 2026 · CA

Electrical system · Engine

While driving my vehicle, i noticed no sound coming from infotainment, signaling or lights being able to turn on. After pulling over at the nearest gas station, i parked and turned the vehicle off and waited for 30 minutes. Soon after that time, i turned the vehicle on and sound came back. However, i noticed the fuel management system begin to soon immediately kick in hard and loud while i started to drive away. This caused a major concern because i was with my family and didn’t know if ok we were going to be able to make it to my daughter’s softball tournament and home safely.

NHTSA ID 11771021

Oct 11, 2026 · TN

Engine

[XXX] - Catastrophic engine shutdown. Yes engine is still at Don Ledford Automotive Group, Cleveland, TN During the engine shutdown, we were still moving on a two lane highway in rural South Carolina. Other vehicles had to swerve/pass to avoid our sudden slowdown. On [XXX], I had the car towed(Dealers Choice - $1,488) from Cooper Chevrolet in Waltersboro, SC(5.75 hours from my home) to my home dealership....Don Ledford Automotive Group. On [XXX], Dealer confirmed complete crankshaft bearing failure and supposedly is going to replace the entire engine. No warning lamps, messages, etc. Only warning we had was a "pop" sound while doing around 60mph. From that moment we had about 5-6 minutes until the car completely shut down in a parking lot on the side of the road. Other items which I have had to deal. 1. On[XXX], getting a rental car in Barnwell, SC so we could continue our trip - (B&B Ford-$800) 2. On [XXX], had to get a rental car at Charelston, SC Airport (Avis-$677.92). I needed the car so I could continue my business trip. On [XXX], my wife returned the car to B&B Ford in Barnwell, SC. I continued on my business trip and returned the rental car I got at the Charleston airport on [XXX] to the Chattanooga, TN Airport. There I had to rent a different/less expensive rental car from Hertz($165.42) on [XXX]. 3. Through Enterprise, GM has provided a rental car from INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID 11770422

Sep 29, 2026 · PA

Engine

Engine failure at 20,959 miles (GM 6.2L V8). Sudden knocking noise. I heard noise at idle, accelerating, and decelerating. Sounds increased in volume / frequency within a 24hr period and driving it only a few miles. GM dealer verified engine failure and is ordering a replacement under warranty.

NHTSA ID 11767907

Sep 21, 2026 · 375 miles · MI

Engine

The contact owns a 2025 GMC Yukon. The contact stated that while driving 50 MPH, the vehicle started shuddering. The failure was a recurring failure. The dealer was contacted in person, and the failure was associated with the dynamic fuel management system. The manufacturer was contacted by phone and made aware of the failure. The failure mileage was approximately 375.

NHTSA ID 11765812

Sep 17, 2026 · 30,765 miles · AL

Power train

The contact owns a 2025 GMC Yukon. The contact stated that while driving approximately 10 MPH, the vehicle unexpectedly lost motive power and came to a complete stop in traffic. There was no warning light illuminated during the failure. The vehicle was restarted; however, the vehicle failed to shift into gear, and the “Service Transmission” message was displayed. The vehicle was towed to the dealer but was not diagnosed or repaired. The contact expressed concerns that the failure could have resulted in a crash or created a safety risk to the contact and the contact’s children while occupying the vehicle. The manufacturer was not made aware of the failure. The failure mileage was approximately 30,765.

NHTSA ID 11765045

Aug 28, 2026 · 33,018 miles · ID

Engine

The contact owns a 2025 GMC Yukon. The contact stated that while driving at an undisclosed speed, the engine seized. No warning lights illuminated. The vehicle was towed to a dealer, where it was diagnosed that the engine, radiator, and an unknown belt needed to be replaced. The vehicle was repaired; however, the failure recurred. While driving at an undisclosed speed, several unknown warning lights illuminated, and the engine seized upon arriving at the dealer location. The vehicle failed to restart. The dealer diagnosed that the generator and air conditioner failed and needed to be replaced. The vehicle was in the process of being repaired. The manufacturer was notified of the failure, and a case was opened. The failure mileage was approximately 33,018.

NHTSA ID 11760299

Aug 27, 2026 · TX

Engine

As my wife was driven she heard some noise and notice she was losing power. She pull off the side of the road and the car shut off. Could not restart. This happen about 11:30 am on 8/14/26 Got towed to Salida Dealer called Faricy GMC about 3:30 pm. Dealer said it was a complete engine failure and engine needed to be replaced.

NHTSA ID 11759923

Aug 23, 2026 · GA

Engine · Fuel/propulsion system

Vehicle loss of power on the Interstate at a high rate of speed. Vehicle would not start and could not be put in Neutral to safely remove from road.

NHTSA ID 11758878

Aug 4, 2026 · TX

Steering · Electrical system

The progressive failure of the factory steering wheel adhesive on my 2025 GMC Yukon creates an immediate, active safety hazard during vehicle operation. The material failure and sticky glue are localized directly around the integrated heating element of the steering wheel. This failure severely impacts driving maneuvers as well as a potential electrical fire hazard. The liquefied glue residue is incredibly sticky and continually transfers to the driver’s hands, resulting in a compromised, slippery grip on the steering wheel. During active driving maneuvers, such as hand-over-hand turning, navigating sharp curves, the loose edges of the peeling leather and separating trim physically catch on the driver's palms. This restricts smooth wheel rotation, disrupts natural hand movement, and threatens a sudden, temporary loss of steering control. This manufacturing defect introduces severe driver distraction and physical interference with critical steering components while driving, compounded by a potential thermal or electrical defect in the steering wheel heating assembly.

NHTSA ID 11754669

Jul 31, 2026 · MS

Power train · Electrical system · Engine

GM performed a vehicle wide Over the Air reprogramming of the modules incorporated in the VIP/Global B electronics platform in April, 2026. Following that my vehicle became totally dead. Key fob would not unlock the vehicle. Had to use the metal key, open the drivers door. Opened the door, nothing moved. No lights, no movement from anything on the vehicle. Opened the hood, charged the battery and tried to crank it. Would not budge. Starter would not engage. Disconnected the negative battery cable. Tried again. Still would not budge. After an hour of so of trying and using jumper cables from our other vehicle, still would not budge. I disconnected the negative battery cable from the right front fender ground and reattached it. It then cranked. Drove the vehicle 30 miles at interstate speed. 8 miles in city traffic. Drove home and parked it in the garage. Drove it abput 10-12 days later to get breakfast. Parked it, locked it with the key fob. Came back after getting food, key fob would not work. Opened it with the button on the door handle. Got In tried to crank it. Would not budge. Disconnected the negative battery cable twice, before it cranked, but would not drive. Message in dash said vehicle could not be driven. Finally got it cranked. GM never advised that the battery must have a 70% charge at all times for the electronics to work. Owner's manual contains no such statement. Vehicle is defective to the extent that it will leave me stranded in wherever the battery power is less than 70%. Dangerous to get stranded at night on a lonely road or highway, away from cities with tow trucks and competent service personnel. Vehicle in shop 32 days before dealer advised resolution. Modules bricked requiring engine control module and telematics module replacement.

NHTSA ID 11754040

Jul 30, 2026 · 16 miles · CA

Back over prevention

The contact owns a 2025 GMC Yukon. The contact stated that while the vehicle was shifted into reverse, the rear-view camera displayed a black screen. The image in the rear-view camera was not visible, specifically in areas where there were reflective lights. The dealer was contacted and assisted the contact with the brightness options on the rear-view camera and stated there was no failure with the camera. The camera was not repaired or replaced. The manufacturer was made aware of the failure. The failure mileage was approximately 16.

NHTSA ID 11753795

Jun 19, 2026 · MI

Visibility/wiper · Unknown or other

On multiple occasions the center screen has been non operational when we start the car and just shows a black screen. The volume knob and screen power button are non-responsive. When this occurs the backup camera is inoperable, which is mandatory safety equipment. the HVAC also cannot be adjusted which could cause a windshield fogging condition which is a safety concern. The vehicle has been to the dealer 3 times for screen problems and the issue has not been resolved. When this occurs the problem persists for a few ignition cycles or for up to a couple of days and then will start functioning again. We have not been able to determine any specific condition that is causing the failure.

NHTSA ID 11745319

May 11, 2026 · CA

Engine

Just over 6k miles, engine failure.

NHTSA ID 11737169

May 4, 2026 · AK

Engine

The engine has seized and was replaced

NHTSA ID 11735631

Apr 8, 2026 · TX

Engine

My engine completely failed on March 19, 2026 and it is currently at Sterling GMC in Bryan Texas waiting for a backorder engine as it needs to be completely replaced

NHTSA ID 11729983

Mar 25, 2026 · PA

Unknown or other · Back over prevention › Sensing system › Camera · Back over prevention › Display function

My 2025 GMC Yukon's infotainment system has repeatedly failed. The huge center screen frequently goes black upon starting the car. Once the screen goes black you are unable to control literally dozens of the vehicle's features including but not limited to climate controls, safety features, heated/ventilated seats, gps, lane assist, the radio, no backup camera, etc. When the screen blacks out, the vehicle automatically turns the heat on to 76 degrees every single time and blows hot air from the front windshield defogger vents only. The list of features controlled by the touch screen is quite enormous. I have taken the vehicle to the GMC dealer four (4) times for software updates, none of which solved the problem and they have admitted they have no fix for this issue. The issue is widespread, as I have encountered literally hundreds of owners online like myself dealing with the very same problem; brand new cars that just do not work. GMC has done absolutely nothing to get to the bottom of this.

NHTSA ID 11726887

Mar 22, 2026 · AZ

Engine

Engine failure while driving at 60mph that started with a loud knocking sound to eventual engine failure where it wouldnt turn over. Vehicle has 9600 miles and has had issues since day one of leaving lot requiring fuel injector, intake manifold gasket, lifter and rod with last fix being new coil and spark plug that supposedly fixed issue. The most recent engine failure put my family and kids in danager given 100 degree weather in middle of desert on a small highway with very limited cell service. Vehicle provided no warning lights. Vehicle was towed to dealership and I have not received an update. Vehicle has not been inspected by polive or insurance or others.

NHTSA ID 11726211

Mar 16, 2026 · NC

Forward collision avoidance › Warnings · Air bags · Engine

Purchased new August 29, 2025 On 12/3/25- Mileage 4495. Took vehicle in for first maintenance service. Tire rotation and oil change. On 1/7/26- Reported grinding noise we had began noticing when starting vehicle. Engine light Service ESC. Service Traction control. Reported to Ben Mynatt GM. On 1/8/26 Mileage 7120- Took Yukon in for service due to grinding noise. Due for 6 module updates and 3 stand alone updates. On 2/16/26 Noticed ticking noise when heat in on high. Scheduled service for 2/26. On 2/24/26 Smell from car, oil reporting low. Dip stick completely dry. Sent email and photos to Ben Mynatt Service. On 2/26/26 Took vehicle in for service. Service advised to start oil consumption test. Ordered blower motor for the squealing noise. Cyl 3 misfire. Was told by the dealer, possibly needs engine 2/27/26 Took Vehicle in for service Check engine light on. Bearing inside blower motor and blower motor replaced. Replaced coil cyl 3 Tire Rotation 2/28/26 Car shaking, smoking, engine light on. Terrible smell from exhaust. Engine light came on, Service ESC, Service Traction Control, Forward Collision Unavailable, Reduced Acceleration Drive with Care Alert. GMC Alert: Service the engine and transmission system immediately alert, Engine Light on. Vehicle Approx miles. Codes misfires to cylinder 3. Took vehicle right to Service Dept. Codes Cleared. Replaced coil on cyl 3 March 7th - Mileage 11,200 Car shaking vigorously! Engine light flashing. Loud knocking coming from vehicle. GMC alert: Service the engine and transmission system immediately alert. Emission system- service now. Engine and Transmission System Service now. Service antilock braking, Stabilitrack stability control systems and airbag system. Service Air Bag System. Emailed to Service March 9th. Took vehicle in. Cylinder 3 & 8 misfire code cold start rough idle code. Oil consumption using approx1 qt of oil/500 miles. Vehicle unsafe risk of engine seizure, fire risk and loss of acceleration is extreme danger

NHTSA ID 11724693

Mar 7, 2026 · NV

Engine

Vehicle went into limp mode while driving on the highway. Onstar said it was the transmission. Checked the oil and smoke was billowing out of the dip stick and there was no oil. None of the sensors indicated that there was low oil. After sitting and waiting for a tow truck rechecked the oil with the dipstick and there was oil in it. Now requires a new engine.

NHTSA ID 11722657

Feb 24, 2026 · 8,837 miles · NC

Engine

The contact owns a 2025 GMC Yukon. The contact stated that while driving at an undisclosed speed, the vehicle unexpectedly went into LIMP Mode with a limited speed availability message displayed. The vehicle was restarted; however, the failure recurred. The vehicle was taken to the dealer, where it was diagnosed with engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 8,837

NHTSA ID 11720219

Feb 9, 2026 · NV

Engine

The 3.0L diesel motor failed around 5700 miles. The thrust bearing failed and the engine and the turbo needed to be replaced.

NHTSA ID 11716889

Feb 7, 2026 · MI

Engine

Engine started knocking and developed slow acceleration out of the blue. In addition car has locked up on freeway despite not having any cars around me. Its been in the shop for 3 days and still no diagnosis.

NHTSA ID 11716461

Feb 3, 2026 · MS

Power train · Engine

While driving on a highway, the vehicle intermittently suffers a sudden loss of engine power during acceleration, accompanied by a flashing check engine light. The most serious event occurred while merging into traffic when the vehicle failed to accelerate normally and briefly lost power, creating a risk of being struck by faster-moving vehicles. Pulling over and restarting temporarily restores normal acceleration, but the problem recurs. The malfunction appears consistent with an engine misfire/powertrain fault. An OBD scan has shown misfire-related diagnostic codes (random/multiple misfire and a cylinder-specific misfire). The condition is intermittent and often occurs after approximately 10–45 minutes of driving. The vehicle remains available for inspection. The vehicle has been presented to authorized service departments multiple times. Dealers reported they were unable to duplicate the issue during road testing and no lasting repair has been completed. The manufacturer has been contacted and the vehicle has been evaluated through authorized service channels, but the underlying cause has not been identified. This remains a safety hazard because it reduces acceleration in traffic. Incident list: • 10/25/2025 (~12:25 PM; ~3,108 miles): Loss of power while merging; flashing CEL; restart temporarily resolved. • 10/27/2025–11/04/2025: Intermittent recurrence, usually lasting a few minutes then clearing. • 11/05/2025 (~8:01 AM; ~3,641 miles): Flashing CEL and misfire/loss-of-power symptoms; taken for service. • 11/26/2025 (~10:06 AM): Another episode consistent with the same pattern. • 12/17/2025 (~8:21 AM): Another episode, including during travel to a service visit. • Ongoing: Episodes after ~10–45 minutes; sometimes requires restart to restore drivability. Observed codes: P0300 and P0301. Safety risk: loss of power during acceleration/merging increases risk of rear-end or side-impact collision.

NHTSA ID 11715405

Feb 3, 2026 · MS

Forward collision avoidance › Adaptive cruise control · Forward collision avoidance › Automatic emergency braking · Lane departure › Blind spot detection

While driving on a highway, the vehicle intermittently experienced a sudden loss of engine power during acceleration, accompanied by a flashing check engine warning light. The most serious event occurred while merging into traffic, when the vehicle failed to accelerate normally and briefly lost power, creating a risk of being struck by faster-moving vehicles. After pulling over and restarting the vehicle, normal acceleration temporarily returned, but the problem has recurred multiple times. The malfunction appears to be related to an engine misfire or powertrain fault because the check engine light flashes during the events and an OBD scan has shown misfire-related diagnostic codes (random/multiple misfire and a cylinder-specific misfire). The condition is intermittent and typically occurs after the vehicle has been driven for approximately 10–45 minutes. The vehicle remains available for inspection. The vehicle has been presented to authorized service departments multiple times for diagnosis. The dealerships have reported that they were unable to duplicate the issue during road testing and no lasting repair has been completed. The manufacturer has been contacted and the vehicle has been inspected/diagnosed through authorized service channels, but the underlying cause has not been identified. The failure continues to occur intermittently and is a safety hazard because it affects acceleration in traffic. Incident list 10/25/2025 (~12:25 PM; ~3,108 miles) — While accelerating to merge onto a highway, the vehicle lost power and the check engine light flashed. The driver pulled over, shut the vehicle off, restarted, and the condition temporarily resolved, allowing the trip to continue. 10/27/2025–11/04/2025 — The same loss-of-power/misfire behavior recurred intermittently, typically lasting a few minutes before clearing. 11/05/2025 (~8:01 AM; ~3,641 miles) — The check engine light flashed again and symptoms consistent with misfire/loss of power were present. The

NHTSA ID 11715402

Feb 1, 2026 · NY

Engine · Power train

ENGINE died rattling sound undeer car shaking loss of power

NHTSA ID 11714774

Jan 23, 2026 · TX

Engine

suddenly went into limp mode on the highway, engine had to be replaced due to bearing failure sending metal through the engine

NHTSA ID 11712964

Jan 21, 2026 · OH

Steering · Lane departure › Warning · Lane departure › Assist

This has happened twice. Once in November 2025 and then in January 2026. With super cruise engaged while going around a curve super cruse disengages and the steering wheel turns to driving straight. You have about one or two seconds to take control or crash. This happened while driving about 70 mph on interstate I 70 and next on Ohio 122 going about 45 mph. On I 70 it was a gentle curve and on 122 it was a much sharper curve. Super cruse must give a warning that it about to disengage that is much longer than one or two seconds.

NHTSA ID 11712431

Jan 20, 2026 · CO

Engine

Warning about reduced acceleration and need for immediate servicing. Dealership reports notice about this issue by using diagnostic codes. Needs engine and turbo charger replaced. Vehicle has only 6500 miles on it.

NHTSA ID 11712217

Jan 20, 2026 · TX

Unknown or other

Driving along on an empty road and my panoramic sunroof back glass exploded it sounded like a gunshot going off. Could have caused a wreck it was so loud and scary.

NHTSA ID 11712142

Jan 19, 2026 · MN

Engine

Brand new engine blew up while driving. It had 2,000 miles on it. It has been replaced but am worried it will happen again

NHTSA ID 11711869

Jan 17, 2026 · AR

Engine

Engine Failure confirmed by dealership. Engine being replaced. Knocking sound and went in to “limp mode” and check engine light. Dealer stated it had issue with crank shaft causing metal in the oil. 5,117 miles at time of failure. 3.0 L Duramax diesel

NHTSA ID 11711620

Jan 14, 2026 · AZ

Electrical system · Engine · Fuel/propulsion system

2025 Yukon Denali - Purchased in July of 2025 Specifically to pull air stream trailer. Vehicle Was equipped with necessary tow package for this purpose! #1 problem: Went into limp mode, stopped in traffic, towed to dealer. One week to repair and replace fuel system. ( under 700 Miles ) #2 Problem: Went into limp mode while pulling trailer, vehicle lost all the transmission fluid on ground. In shop sixteen days waiting for new transmission parts. ( Under 700 Miles ) #3 Problem: Vehicle stopped in traffic, towed to dealer where it was determined it needed new engine. In shop Nov 27, 2025, still in shop as of Jan 14, 2026. No ETA on engine or delivery. ( Under 2000 Miles ) #4 Problem: During last failure attempt to use "on star" failed, still not resolved. This vehicle is a danger to the owner and its passengers as well as others when it simply stops working in the middle of a busy highway with a 23' trailer in tow. Not to mention I have $160,000 invested in a car and camper I have yet to be able to use.

NHTSA ID 11710882

Dec 30, 2025 · IN

Engine

My 2025 GMC Yukon AT4 Ultimate experienced reduced acceleration, and I immediately took it to the dealer. The dealer concluded it was a thrust bearing failure, and GM has authorized a complete engine replacement. I wanted to report this issue, as I believe it represents a potential safety concern. I would like to clarify whether GM has identified the root cause of this problem and redesigned the replacement engine to prevent recurrence. Additionally, I want to be able to track the replacement engine through its serial number for documentation purposes. I am submitting this report to formally document my concern. While GM has acknowledged the thrust bearing issue through a memo #25-NA-307, they have not confirmed whether the redesigned replacement engine will prevent this failure from happening again. Please advise. Sincerely, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID 11707778

Dec 2, 2025 · IN

Engine · Power train

I bought a brand new 2025 GMC Yukon AT4 3.0 Diesel on 8/16/25 (had 213 miles on). A month later, with only 2000 miles on the vehicle, I was driving down the road and got a warning "reduced acceleration, drive with caution". Car would hardly accelerate. Had it towed to the dealer on 9/22/25. They found metal shavings in the engine oil. Said there was a quarter inch play around the camshaft (manufacture defect). Told me I need a completely new engine. It's now 12/2/25 and I still don't have a car, and mine hasn't been repaired.

NHTSA ID 11702528

Nov 16, 2025 · MS

Engine

On November 5, 2025, this 2025 diesel GMC Yukon Denali brand new vehicle went into "limp mode" 75 days after purchase with 3,957 miles on the odometer. Vehicle began to decelerate on a busy road. Warning lights went on to indicate that accelerating was no longer possible. Other fast-moving vehicles on the road came very near to the Yukon and quickly passed it/weaved around it, jeopardizing the lives of this Yukon's driver and occupants. At times, the Yukon diesel vehicle would only reach 15 MPH. Vehicle eventually driven to nearest GM dealership. The GM dealership service center reported a P06D code and reported that the engine experienced catastrophic engine failure. A new diesel engine has been ordered but is not yet available to the dealership for installation. (The dealership also reports that two other new GM diesel SUVs are waiting on new engines due to catastrophic engine failure.)

NHTSA ID 11699621

Nov 12, 2025 · TX

Engine

On October 21, 2025, with only 4,197 miles on my Yukon, the vehicle suddenly died while in drive in a parking lot. The vehicle would not restart or shift into neutral. I contacted OnStar, who arranged for the vehicle to be towed to the nearest GMC dealership. Since that date, the vehicle has remained at the dealership and has been diagnosed as needing a complete engine replacement due to metal shavings found in the engine. There were no warning lights, messages, or performance issues prior to the failure. This incident was both unsafe and alarming, as the vehicle shut down unexpectedly without any warning while I was driving. I would like to understand how such a major failure could occur on a brand-new vehicle with so few miles.

NHTSA ID 11698966

Nov 7, 2025 · NC

Electrical system

I'm reaching out because I've encountered a really concerning issue with my 2025 GMC Yukon AT4 Ultimate. There's a really loud popping noise randomly coming from the speakers that's honestly quite startling and dangerous while driving. Most recently, it scared me so much that I swerved off the road and nearly crashed. If you review online forums, you will find that this has been experienced by other owners as well. I've tried to resolve this through your usual service channels, but my concerns have been dismissed without any recommended action to ensure my family's safety. After scheduling with my local GMC dealership they couldn't replicate the noise and sent me on my way. I also brought it up with GMC Customer Care, and they suggested I try to record the sound, or keep bringing it in for service if it happens again. The problem is if I tell them it keeps happening again, what good will it do? It's a loud pop coming from the back speaker area. Even if they had 7 technicians hearing it at the same time, how will that make a difference. I need them to start testing components and replacing them one by one until its resolved.

NHTSA ID 11698075

Nov 6, 2025 · CA

Electrical system · Engine · Fuel/propulsion system

Driving through the intersection of N. Scottsdale Road and E. Bell Road in Scottsdale AZ my collision warning red light flashed on the screen and the engine turned off. This caused me to lose forward propulsion and forced me to navigate to the side of the road to avoid being hit by another car. At Van’s GMC, the service manager told me that we experienced a catastrophic engine failure and that the engine seized. Vehicle has been inspected, but I have not received an official diagnostic even though I have requested. There were no warnings or indications that the vehicle was compromised prior to the engine turning off.

NHTSA ID 11698039

Source: NHTSA complaint and recall records, complaints received through Nov 18, 2026. How we count