Notu Cars

2025 Mazda Mazda3 problems and complaints

Owners have filed 10 complaints with NHTSA about the 2025 Mazda Mazda3. The most-reported problem area is powertrain (2 complaints), followed by driver assistance (2) and air bags (1). The complaints report 2 crashes and 1 injury. NHTSA lists 1 safety recall for this model year.

Complaints
10
Recalls
1
Crashes
2
Fires
0
Injuries
1
Deaths
0

What owners report about the 2025 Mazda Mazda3

Complaints by problem area. A complaint can name more than one area, so the bars add up to more than 10.

Powertrain
2
Driver assistance
2
Air bags
1
Speed control
1
Suspension
1
Wheels and tires
1
Seat belts
1

Most-reported specific components

Forward collision avoidance › Automatic emergency braking
2
Power train › Automatic transmission › Internal › Clutches/bands
1

How the 2025 compares with other Mazda Mazda3 years

The 2025 model year has the 22nd-most complaints of 23 Mazda Mazda3 model years on record. Counts are not adjusted for sales, and newer model years have had less time to collect complaints.

2005 972006 1662007 2222008 3032009 1152010 6862011 1322012 2262013 1172014 1382015 1312016 1042017 842018 1102019 742020 322021 562022 242023 122024 122025 10

All Mazda Mazda3 model years

When the complaints were filed

Complaints NHTSA received each calendar year about the 2025 Mazda Mazda3. First on Jan 31, 2025, most recent on Nov 10, 2026.

View as table
Year receivedComplaints
20254
20266

2025 Mazda Mazda3 recalls

1 recall campaign on record, newest first. A recall may cover only some vehicles of this model year. Check your VIN at NHTSA to see whether a recall is open on a specific car.

Air bags › Air bag/restraint control module › Software

NHTSA campaign 25V357000 · Filed May 29, 2025 · 171,412 vehicles potentially affected

Defect
Mazda North American Operations is recalling certain 2024-2025 Mazda3 and CX30 vehicles. The Sophisticated Air Bag Sensor (SAS) units may set an error code and deactivate the air bags, due to a low battery condition.
Risk
Air bags that do not deploy in the event of a crash increase the risk of injury.
Remedy
Dealers will reprogram the SAS unit with improved software or replace the unit, free of charge. Owner notification letters were mailed July 24, 2025. Mazda's number for this recall is 7525E.

What 2025 Mazda Mazda3 owners wrote

All 10 complaints, exactly as filed with NHTSA, newest first. These are owners' own accounts and have not been verified.

Nov 10, 2026 · 25,000 miles · OH

Power train › Automatic transmission › Internal › Clutches/bands

The contact owns a 2025 Mazda Mazda3. The contact stated that while driving, the vehicle lost motive power. The vehicle was towed to the dealer and was diagnosed with transmission clutch failure. The contact was informed that the transmission clutch needed to be replaced. The vehicle was repaired. The manufacturer was contacted and made aware of the failure. The failure mileage was approximately 25,000.

NHTSA ID 11776962

Nov 8, 2026 · OH

Power train

Three times, last time 3 days after expensive rebuild, clutch hydraulic! Llnkage failed, burning out clutch. Clutch master cylinder also controls braking, very bad design. Most have separate master cylinders. Braking impacts clutch! State lemon law should apply.

NHTSA ID 11776571

Sep 28, 2026 · VA

Unknown or other

My car started displaying a telematic malfunction. The service paperwork also says U0198:00-03 CMU Communication error with emergency call unit. The Mazda dealerships maintenance department says this is currently unrepairable. According to them if I have an accident the car will not communicate that through the emergency call unit. The car was purchased new and has had no accidents. I have taken it to the dealership 4 separate times to repair this problem.

NHTSA ID 11767456

May 31, 2026 · FL

Vehicle speed control

WHEN TURNING A CORNER IN MY NEIGHBORHOOD, AS I GOT AROUND THE CORNER (SLOW SPEED (10 MPH?). THE CAR GRADUALLY SPED UP ON IT'S OWN WITHOUT PUSHING THE GAS PEDAL. NO CRUISE ON AND NO FLOOR MAT PROBLEM. WHILE IN CRUISE CONTROL "ON", THE ENGINE "REVED UP. TOOK THE VEHICLE TO THE DEALER, THEY COULD NOT FIND A PROBLEM.

NHTSA ID 11741126

May 23, 2026 · SC Crash 1 injury

Unknown or other

The vehicle was involved in a rear and side impact collision and the car was totaled on 5/14/2026. The air bags did not deploy. There was a recall on the air bag system immediately after purchase 6/28/2025 and it was taken in July of 2025 to Mazda of Columbia, SC and it was “repaired.” The airbags of the truck that collided with the Mazda did deploy.

NHTSA ID 11739690

May 5, 2026 · FL

Seat belts

I am reporting a catastrophic failure of the rear seatbelt restraint system in my 2025 Mazda 3. The rear seatbelt guide geometry is badly designed, allowing the webbing to bunch and jam during normal operation. This physical obstruction prevents the seatbelt from retracting, leading to three severe safety hazards: 1) Total failure to restrain occupants. 2) Structural damage to the vehicle's safety cell. 3) Public hazard where the obstructed door rebounded open into oncoming traffic. Restraint Failure: On multiple occasions, the rear seatbelt jammed in the guide clip while in use. Due to the lack of retraction, a 200lb adult passenger was able to fully exit the vehicle while the belt remained buckled. Most alarmingly, the vehicle's safety logic failed to trigger any occupancy warning alarms. The system remained "satisfied" because the buckle was engaged, despite providing zero tension or restraint to the occupant. Structural Damage & Public Hazard: Because the belt failed to retract, it remained loose and obstructed the rear door's closing path. The door rebounded off the slack belt into oncoming traffic, resulting in a significant structural dent to the C-pillar (door jamb) immediately adjacent to the striker. This deformation occurred in a critical area for side-impact protection. Efforts to Resolve: The vehicle was inspected by a dealer, who claimed the system was functioning normally despite being shown the jamming. I escalated this to the Mazda North American Operations Executive Office. The executive team issued a final dismissal, refusing to provide technical answers or acknowledge the documented failure points. Crucially, they denied my request for a Regional Technical Manager (RTM) to perform an engineering review of the guide geometry and refused to inspect the damage to the C-pillar. By refusing a corporate inspection, Mazda has ignored a reported life-safety defect and its resulting structural damage. This is documented on a video provided

NHTSA ID 11735932

Aug 17, 2025 · TN

Suspension · Wheels

January 10, 2025, at low city speed, I struck a small pothole. The entire car felt like it had been in an accident—a violent jolt—followed by immediate vibration and a pull. Inspection showed one OEM 18" rim was bent. I contacted Mazda after diagnosing and was offered a slight discount on the replacement rim, not a warranty repair or full diagnosis. I have the bent rim in my possession. July 2025, at low speed, I barely contacted another small pothole and immediately felt the same drivability issues. A second rim was found damaged. This was only 4,500 miles after the first incident. I called the dealership manager; he said he would get back to me but never did. I later sent a letter that went unanswered. My subsequent research shows innumerable similar owner complaints for 2020–2025 Mazda 3s experiencing rim deformation from ordinary road irregularities. Why this is a safety issue (technical points): Bead-seat deformation & air loss: A bent alloy rim can distort the bead seat, causing slow leaks or sudden deflation, especially after heat cycles—creating a loss-of-control risk. Dynamic instability: A rim that’s even slightly out-of-round produces high-frequency vibration, steering pull, and reduced traction in turns or under braking; it can trigger ABS/ESC interventions and increase stopping distance. Load path & suspension stress: The 18" low-profile package leaves little sidewall cushion. On normal bumps/potholes, impact energy transfers directly to the wheel. Repeated “bottom-out” events may damage shocks/struts, alignment, and tires, compounding instability. Repeatability & foreseeability: Two events under ordinary use within a short interval indicate a systemic integrity problem, not random abuse. Requested resolution: A no-cost remedy: (1) replace all rims/tires with more durable parts and inspect/repair suspension; or (2) provide comprehensive wheel/tire protection and repair damaged rim; or (3) exchange he vehicle for a comparable model with no issue

NHTSA ID 11681156

Jun 5, 2025 · GA

Air bags

I found out about this recall today. Mazda doesn’t have a fix to this recall yet. I am scared to drive my car in the event of a crash, due to the fact that my airbags won’t go off due to the recall. Mazda said to just “be aware until we have a fix” I cannot just “be aware” if I get into an accident and my airbags don’t go off.

NHTSA ID 11665067

Feb 4, 2025 · MI Crash

Forward collision avoidance › Automatic emergency braking

Car was turning left in front of me. I was going about 30 mph. I started to steer to the right of the car into a passing lane. The AEB stopped me and the guy behind me rear-ended me. The system did not need to react, I was not going to hit the car in front of me, but I could not steer to the right until I came to the passing lane.

NHTSA ID 11640657

Jan 31, 2025 · MI

Forward collision avoidance › Automatic emergency braking

Second event: Again about 30 mph, a FEDEX truck was turning left in front of me, as I steered to the right to pass it, the AEB stopped me, fortunately there was no one behind me this time. The last time this happened I was rear-ended.

NHTSA ID 11639907

Source: NHTSA complaint and recall records, complaints received through Nov 18, 2026. How we count